February AIContract Templates

Tennessee, US · Professional Services

Engineering Consulting Agreement
Contract Template For Tennessee, US

Tennessee engineering consulting agreement with licensed-practice, responsible-charge, scope, standard-of-care, change and owner-information protections.

Governing law: Tennessee, USPublished templateUpdated 2026-11-10
ENGINEERING CONSULTING AGREEMENT
ENGINEERING CONSULTING AGREEMENT Tennessee, US Agreement date: [date] Client: [legal name and entity type], of [address] (Client). Engineer: [legal name and entity type], of [address] (Engineer). Project: [name and Tennessee location] (Project). 1. Licensed services and responsible charge Engineer shall perform the engineering services and deliverables in Schedule 1 (Services). Engineering that Tennessee law requires to be performed, supervised, signed or sealed by a registrant shall be performed under the responsible charge of a Tennessee-registered professional engineer competent in that discipline. Engineer shall identify that professional in Schedule 1 and maintain all required individual and firm registrations. No person may alter a sealed instrument without the required professional review. Draft, preliminary or marked-not-for-construction material is not a final instrument and may not be used for construction, permitting or procurement. 2. Standard of care Engineer shall use the care and skill ordinarily exercised by similarly situated Tennessee professional engineers performing comparable services under similar conditions at the same time and place. No other warranty or guarantee is made. Engineer shall comply with applicable codes and laws in effect when the applicable design is prepared, while promptly advising Client of a material conflict or later change affecting the Project. Engineer shall place public safety, health and welfare first and may refuse or stop work on a direction that Engineer reasonably believes violates applicable law, code or professional duty after giving Client prompt written notice. 3. Client information and decisions Client shall timely provide accurate surveys, title information, existing-condition records, geotechnical and environmental reports, program requirements, budgets, access, approvals and decisions identified in Schedule 2. Engineer may reasonably rely on information supplied by Client and Client's other consultants unless an error is apparent to a competent engineer. Client is responsible for legal descriptions, land rights, hazardous-material information and subsurface conditions unless Schedule 1 expressly assigns a specific investigation to Engineer. Engineer shall promptly notify Client of a discovered material discrepancy rather than proceed on a known false assumption. 4. Deliverables and milestones Engineer shall deliver the plans, calculations, reports and other instruments listed in Schedule 1 by the stated milestones, subject to timely Client performance and events beyond reasonable control. Client shall review each submission and provide consolidated comments within [number] business days. A review does not transfer Engineer's professional responsibility for its Services. Estimated opinions of construction cost are based on professional judgment and available information; Engineer does not control labor, materials, bids or market conditions and does not guarantee a bid or final cost unless Schedule 1 expressly provides a separate guaranteed-cost service. 5. Compensation and payment Client shall pay the fixed, hourly or milestone compensation in Schedule 3 plus approved reimbursable expenses. Engineer shall submit itemized invoices [monthly]. Undisputed amounts are due within [30] days. Client shall identify a disputed item with reasons within [10] days and pay the undisputed balance. Interest on a late undisputed amount is [rate]% per month or the maximum lawful rate, whichever is less. Engineer may suspend Services after [7] days' written notice if an undisputed amount remains unpaid, unless the suspension would create an imminent public-safety hazard. Schedule and cost shall be equitably adjusted for a proper suspension. 6. Changes and additional services A material change in scope, assumptions, law, site conditions, Client instructions or schedule requires a written change authorization stating the added Services, compensation and time. Engineer may perform emergency work without prior authorization only to address an imminent safety risk, protect work or comply with a governmental order, and shall notify Client promptly. Services not expressly listed in Schedule 1 are excluded, including [surveying, geotechnical investigation, environmental testing, construction means and methods, continuous site inspection, permitting or record drawings], unless added in writing. 7. Permits and construction phase [Client / Engineer] shall prepare and submit the permit applications identified in Schedule 2. Government approval is not guaranteed. If construction-phase Services are included, Engineer's site visits are for general conformity with the design and are not continuous inspection or control over construction means, methods, sequences, safety programs or contractor personnel. Engineer shall report a material observed deviation to Client. The contractor remains responsible for construction, site safety, temporary works and compliance with its contract. Engineer may reject work that materially fails to conform to Engineer's final instruments when Schedule 1 grants that authority. 8. Instruments of service and permitted use Engineer owns its preexisting methods and copyright in its instruments of service. Upon payment of amounts due, Engineer grants Client a nonexclusive license to use final deliverables solely to construct, operate and maintain this Project at the stated site. Client may provide them to contractors and authorities for that purpose. Reuse, modification or completion by another person without Engineer's written involvement is at Client's risk, except that this clause does not excuse Engineer's prior breach. Native files are provided only if Schedule 1 states the format, precedence and permitted use. A signed or sealed final instrument controls over an editable file. 9. Confidentiality and conflicts Each party shall protect the other's nonpublic technical, commercial and personal information and use it only for the Project or as law requires. Engineer shall disclose an actual or potential conflict of interest and obtain any consent required by professional rules before continuing. Engineer shall not accept compensation from another Project participant for the same Services without informed written consent where required. 10. Insurance and records Engineer shall maintain the professional liability, commercial general liability, workers' compensation and automobile insurance stated in Schedule 3 and provide certificates on request. Insurance does not expand liability beyond this agreement or law. Engineer shall retain material Project records for [six] years after substantial completion or the longer period required by law. 11. Indemnity and liability allocation Engineer shall indemnify Client against a third-party claim to the extent caused by Engineer's negligent act, error or omission or willful misconduct in performing the Services. Client shall indemnify Engineer against a third-party claim to the extent caused by Client's negligence, willful misconduct, hazardous materials not introduced by Engineer, or unauthorized reuse. Each party's duty is limited to its comparative fault and does not require indemnity for the other party's sole negligence. Neither party is liable for consequential damages such as lost financing, lost profits or loss of use, except for willful misconduct, infringement, confidentiality breach, or liability that cannot lawfully be waived. Engineer's aggregate liability is limited to [amount / insurance proceeds available], but not below an amount reasonable in relation to the Project and not for willful misconduct or liability that law does not permit to be limited. 12. Suspension and termination Either party may terminate for material breach not cured within [10] business days after detailed notice. Client may terminate for convenience on [10] days' notice and shall pay for Services performed, approved commitments and reasonable closeout costs. Engineer may terminate immediately if continued performance would violate law or professional duty after reasonably practicable notice. On termination, Engineer shall deliver paid-for work in progress, clearly identify its status and cooperate in an orderly transition. Sections concerning payment, professional responsibility, permitted use, confidentiality and liability survive. 13. Disputes and general terms Senior representatives shall first meet in good faith. Unresolved disputes shall proceed to [mediation in county, Tennessee, before litigation / another stated process]. Tennessee law governs. Courts in [county], Tennessee have jurisdiction. Notices must be written and delivered personally, by tracked delivery or acknowledged email. Neither party may assign this agreement without consent, except to a Project successor that assumes it. Engineer may retain qualified subconsultants but remains responsible for their Services. The parties are independent contractors. This agreement and its schedules are the entire agreement. Amendments must be written and signed. Invalid language is narrowed or severed. Delay is not waiver. Counterparts and electronic signatures are permitted. SCHEDULE 1 — SERVICES, DELIVERABLES AND RESPONSIBLE PROFESSIONAL Scope, exclusions, disciplines, deliverables and milestones: [details]. Tennessee professional engineer in responsible charge, registration and seals: [details]. Construction-phase and native-file Services, if any: [details]. SCHEDULE 2 — CLIENT INPUTS, APPROVALS AND PROJECT ASSUMPTIONS Site information, reports, budget, access, permits and review periods: [details]. SCHEDULE 3 — COMPENSATION AND INSURANCE Fees, rates, reimbursables and payment milestones: [details]. Required insurance and any negotiated liability cap: [details]. CLIENT Signature: ____________________ Date: __________ Name and title: [name and title] ENGINEER Signature: ____________________ Date: __________ Name and title: [name and title]

Licensed under CC BY 4.0. Attribution is required when you publish or redistribute this Template or an adapted version to the public. Attribution is not required merely because you use or adapt the Template for your own business or legal purposes, including preparing, negotiating, signing, or exchanging an agreement with a counterparty. License details.

More templates for Tennessee, US