ENERGY SERVICES PERFORMANCE CONTRACT
Washington, US

Agreement date: [date]

Municipality: [full legal name of Washington municipality], of [address], notice email [email] (Municipality).
Contractor: [full legal name and entity type], of [address], notice email [email] (Contractor).

1. Authority, selection and performance basis
Municipality states that it owns the Facility in Schedule 1, adopted [resolution or other appropriate mechanism] authorizing negotiation under chapter 39.35A RCW, published its requirements, evaluated proposals using stated criteria, and selected Contractor as the firm submitting the best proposal. Each signer represents that all authority and approvals required for that party to enter this contract have been obtained.

Contractor shall design, provide, install, commission and support the energy equipment and conservation services in Schedule 2 (Measures). This is a performance-based contract: Contractor guarantees that, for each Guarantee Year, Municipality's payment obligation under this contract will be less than the Verified Savings attributable to the Measures as calculated under Schedule 3.

2. Baseline and design
Baseline means the Facility's energy, water, wastewater, solid-waste or other agreed operating cost and usage before the Measures, normalized only by the variables and method in Schedule 3. Before construction, Contractor shall verify the Baseline, inspect existing conditions, and deliver final designs, equipment specifications, expected useful lives, permits, construction schedule, commissioning plan and guaranteed savings calculations for Municipality's written approval.

Contractor shall not materially change a Measure, Baseline variable, guarantee or price without a signed change order. Municipality approval does not relieve Contractor of responsibility for design, code compliance or the guarantee.

3. Installation and completion
Contractor shall furnish labor, supervision, equipment, materials, permits, testing and documentation needed to complete the Measures by [date]. Contractor shall comply with applicable building, electrical, environmental, safety, public-works, prevailing-wage, licensing and bonding laws. Contractor shall keep the Facility reasonably safe and operational, coordinate outages, protect property, and promptly repair damage it causes.

Substantial Completion occurs when the Measures are installed, operational, commissioned, usable for their intended purpose, and free of material defects, except for a punch list that does not materially impair use or savings. Final Completion requires completion of the punch list, final permits, warranties, manuals, training, lien releases and as-built documents.

4. Contract price and annual payments
The Contract Price, payment schedule, financing assumptions and ownership terms are in Schedule 4. Municipality owes no amount for a change unless authorized in a signed change order. Each annual payment obligation, including the installation year, is subject to the savings guarantee in clause 6.

Invoices must show the applicable milestone or Guarantee Year. Municipality shall pay an undisputed invoice within [30] days after acceptance under applicable payment law and shall identify a dispute with reasonable detail. Municipality may withhold only the reasonably disputed amount.

5. Measurement and verification
Contractor shall measure and verify savings for each Guarantee Year under Schedule 3 using the stated meters, utility data, calculations, normalization variables, rates, inspection steps and reporting dates. Municipality shall provide reasonable Facility access and available utility and operating data. Contractor shall not count savings caused by a Measure outside Schedule 2 or by a change unrelated to Contractor's performance.

Within [60] days after each Guarantee Year, Contractor shall deliver a report showing Baseline, adjustments, measured or stipulated values, calculations, Verified Savings, payment obligation and any shortfall. Municipality has [30] days to identify a specific calculation dispute. The parties shall preserve source data and cooperate in a technical review.

6. Savings guarantee and shortfall payment
Guaranteed Savings and Municipality's payment obligation for each Guarantee Year are stated in Schedule 3. Verified Savings must exceed that payment obligation. If Verified Savings are less, Contractor shall pay Municipality the amount necessary to satisfy the guarantee within [30] days after the report is accepted or a dispute is resolved.

Contractor shall maintain throughout the guarantee term, at Municipality's option, the bond, insurance policy or other guarantee identified in Schedule 4. Municipality has determined that it provides assurance similar to a bond or insurance policy. Failure to maintain it is a material breach. Shortfall payment does not relieve Contractor of a defect, warranty, maintenance or measurement obligation.

7. Operations, maintenance and training
Schedule 2 allocates preventive maintenance, repairs, consumables, controls, monitoring and replacement responsibility. Contractor shall perform assigned work professionally and preserve equipment warranties. Contractor shall train existing Municipality personnel who maintain affected equipment in preventive maintenance, safe operation and the tasks stated in Schedule 2 and provide editable manuals and records.

Municipality shall operate and maintain the Facility as allocated and promptly notify Contractor of a material equipment or usage change. A Baseline adjustment is allowed only under the objective method in Schedule 3 and may not be used to excuse Contractor's failure.

8. Ownership, risk and warranties
Ownership of each Measure during and after the Term is stated in Schedule 4. Contractor bears risk of loss before Substantial Completion except to the extent Municipality causes the loss. Title shall pass free of Contractor liens at the stated time. Contractor warrants for [two] years after Substantial Completion that labor is professional, equipment is new unless stated otherwise, and the Measures conform to this contract. Manufacturer warranties shall be assigned to Municipality to the extent transferable.

Contractor shall promptly correct covered defects. Emergency work may be performed by Municipality after reasonable notice when delay threatens safety, property or essential operations, without waiving recovery from the responsible party.

9. Records, audit and public disclosure
Contractor shall retain cost, payment, design, commissioning, maintenance and savings records for [six] years after final payment or longer if law requires. Municipality and authorized public auditors may inspect relevant records on reasonable notice. Contractor shall identify material it believes is legally exempt from public disclosure but acknowledges Municipality must comply with Washington public-records law and cannot promise confidentiality contrary to law.

10. Insurance, indemnity and safety
Contractor shall maintain the insurance and bonds in Schedule 4 and provide certificates before work. To the extent permitted by law, Contractor shall indemnify and defend Municipality and its officers and employees from third-party claims for bodily injury, death or tangible property damage caused by Contractor's negligence, willful misconduct or breach, but not to the extent caused by Municipality. Any employer-immunity waiver must be expressly stated in Schedule 4 and mutually negotiated.

Contractor is responsible for site safety and its personnel and subcontractors. It shall promptly report an incident, environmental release, lien or regulatory notice related to the work.

11. Default and termination
Either party may terminate for a material breach not cured within [30] days after detailed notice, or within a longer reasonable period if cure begins within 30 days and proceeds diligently. Municipality may terminate immediately for loss of required license, bond or guarantee; fraud; abandonment; or an uncured serious safety risk.

Municipality may terminate for public convenience on [30] days' notice and shall pay for conforming accepted work, reasonable demobilization and authorized noncancelable commitments, less prior payments and avoidable costs. It shall not owe lost profit on unperformed work. Contractor shall deliver paid designs, records, warranties and site materials and cooperate in an orderly transition. Savings, warranty, audit, indemnity and payment duties accrued before termination survive.

12. Disputes and general terms
The parties shall first refer a technical savings dispute to one qualified independent engineer jointly selected and paid equally; the engineer's written determination is evidence but does not waive judicial remedies unless the parties separately agree in writing.

Washington law governs. Venue lies in the state court for [county], Washington, subject to lawful federal jurisdiction. Contractor is an independent contractor and remains responsible for subcontractors. It may not assign the contract without Municipality's written approval.

This contract and its schedules are the entire agreement. An amendment or waiver must be signed by authorized representatives. Notices are effective on personal or tracked delivery or acknowledged email. Invalid language shall be narrowed or severed. Counterparts and electronic signatures are permitted.

SCHEDULE 1 - FACILITY AND PROCUREMENT
Facility name, address, ownership and affected systems: [details].
Municipal authorizing resolution or mechanism and date: [details].
Published requirements and selection record: [details].
Authorized representatives and access rules: [details].

SCHEDULE 2 - MEASURES, WORK AND MAINTENANCE
Each Measure, equipment, location, design criteria and expected useful life: [details].
Construction milestones and completion date: [details].
Commissioning and acceptance tests: [details].
Operations, maintenance, monitoring and replacement allocation: [details].
Training, manuals and as-built documents: [details].

SCHEDULE 3 - BASELINE, GUARANTEE AND VERIFICATION
Baseline period, data, utility rates and normalization variables: [details].
Measurement and verification method, meters and calculations: [details].
Guarantee Year dates: [details].
Guaranteed Savings by year: [amounts].
Municipality payment obligation by year: [amounts lower than Guaranteed Savings].
Permitted Baseline adjustments and dispute method: [details].

SCHEDULE 4 - PRICE, SECURITY, OWNERSHIP AND INSURANCE
Contract Price, annual payments and financing terms: [details].
Ownership and risk-transfer points: [details].
Savings-guarantee bond, insurance policy or equivalent assurance: [details].
Performance and payment bonds: [details].
Required insurance and limits: [details].
Expressly negotiated employer-immunity waiver, if any: [details or none].

MUNICIPALITY
Signature: ____________________ Date: __________
Name and title: [name and title]

CONTRACTOR
Signature: ____________________ Date: __________
Name and title: [name and title]


---
License: Licensed under CC BY 4.0. Attribution is required when you publish or redistribute this Template or an adapted version to the public. Attribution is not required merely because you use or adapt the Template for your own business or legal purposes, including preparing, negotiating, signing, or exchanging an agreement with a counterparty. License details.
License details: https://contract-templates.getfebruary.ai/license/