PRIVATE LABEL AGREEMENT
New Zealand

Date: [date].
Buyer: [legal name, New Zealand company or business number and address] (Buyer).
Developer-Manufacturer: [legal name, New Zealand company or business number and address] (Manufacturer).

Private Label Product means the Buyer-specific product in Schedule 1. Product Brief means its target features, design requirements, packaging, tests, claims and cost. Approved Specification means the final specification and reference sample approved under clause 2. Buyer Materials and Commissioned Deliverables mean the items identified as such in Schedule 3. Order means an order accepted under clause 3. Working Day excludes Saturdays, Sundays and public holidays at the delivery location.

1. Development appointment
The Buyer appoints the Manufacturer to develop and manufacture Private Label Product for the Buyer's brand. The Manufacturer must use reasonable care and skill, suitable resources and documented quality controls. Commercial production may begin only after approval under clause 2.

Exclusivity applies only if Schedule 2 precisely defines the product category, territory, channels, minimum purchase and period. Otherwise the appointment is non-exclusive, but the Manufacturer must not disclose or use the Buyer's confidential Product Brief or Buyer Materials for another customer.

2. Development, approval and change
The Manufacturer must prepare the prototypes, costings and tests in the development plan. Within [ten] Working Days, the Buyer must approve a submission or give specific reasons for rejection. Final sample and specification approval establishes the Approved Specification.

A proposed change must state its effect on composition, performance, legal compliance, price, tooling, minimum quantity and timing. No change takes effect until authorised representatives sign it. The Manufacturer may make the minimum urgent change required by law or safety after prompt notice, but must stop affected supply if the change materially alters the approved product until the Buyer approves it.

3. Orders and payment
An Order must state SKU, quantity, approved artwork version, NZD price, delivery date and destination. It becomes binding only when accepted in writing within [five] Working Days. Forecasts are non-binding unless Schedule 2 states a minimum. This agreement prevails over conflicting boilerplate in an Order, quotation, acknowledgement or invoice.

Development fees, unit prices, tooling charges, permitted review, GST and payment are in Schedule 2. The Manufacturer must provide taxable supply information where required. The Buyer must pay an undisputed invoice within [twenty] Working Days and promptly explain a dispute.

4. Manufacture and market compliance
The Manufacturer must use the Approved Specification, sources and facility, maintain batch and traceability records for [period], complete the tests in Schedule 1 and release only conforming product. It may not change a material, source, process, site, pack, label or test outside clause 2.

The Manufacturer is responsible for its facility, process, workmanship, technical product facts and regulatory matters allocated to it. The Buyer is responsible for lawful use of Buyer Materials, market claims it creates and matters allocated to it. Schedule 1 must identify applicable product-safety standards, mandatory consumer information, warnings and market authorisations with the responsible party.

No claim may be used unless the responsible party has reasonable grounds and both parties approve the final artwork. Nothing authorises misleading or deceptive conduct. Each party must promptly correct information it learns is materially inaccurate.

5. Quality, workplace duties and remedies
The Buyer may audit relevant production areas and quality records on reasonable notice. Each party remains responsible for its Health and Safety at Work Act 2015 duties and must consult, cooperate and coordinate where work overlaps.

The Buyer may inspect product before shipment and within [ten] Working Days after delivery. Approval, inspection or payment does not waive a latent failure to meet the Approved Specification or a mandatory requirement.

For a failure caused by its breach, the Manufacturer must, at the Buyer's reasonable election, promptly rework, replace or refund affected product and bear reasonable documented retest, return and redelivery cost. The Buyer bears equivalent cost caused by defective Buyer Materials, inaccurate instructions or an unauthorised Buyer change.

If both parties are in trade, Private Label Product is acquired in trade and Schedule 2 expressly records agreement to contract out of identified provisions of the Consumer Guarantees Act 1993 or Fair Trading Act 1986, that agreement applies only to the extent permitted and fair and reasonable. Otherwise all non-excludable rights remain.

6. Safety incidents and recalls
Each party must promptly report a complaint pattern, serious safety incident, failed test, regulator contact or recall request. They must cooperate on tracing, stop-sale, investigation, consumer notice, correction and recall. Reasonable corrective and recall costs are borne according to the extent each party's breach, negligence or supplied defective material caused the event, subject to mandatory law.

7. Delivery, title and Buyer Materials
The Manufacturer must package and deliver product with the documents in Schedule 2. Title passes [on full payment/on delivery], and risk passes at the named destination unless Schedule 2 states an agreed delivery term and place.

Buyer Materials remain the Buyer's property, must be identified and segregated, and may be used only for this agreement. The Manufacturer must exercise reasonable care, report loss or damage and not create a security interest over them. It must not sell overruns or seconds bearing Buyer marks and must de-brand or destroy them as directed.

8. Intellectual property and confidentiality
Each party retains pre-existing intellectual property. On full payment, the Manufacturer assigns its transferable rights in the Commissioned Deliverables identified in Schedule 3. The Manufacturer retains Background Technology, meaning its pre-existing or generally applicable formula platform, production method and know-how.

If a Commissioned Deliverable incorporates Background Technology, the Manufacturer grants the Buyer the non-exclusive, perpetual licence described in Schedule 3 to use that deliverable for the Private Label Product. No ownership or licence arises by implication.

The Buyer licenses Buyer Materials to the Manufacturer during the term solely for development and accepted Orders. Each party must protect the other's non-public information and disclose it only to bound people who need it or as law requires.

9. Term and cancellation
This agreement starts on [date] and continues for [term]. Either party may end it on [ninety] days' notice, subject to any defined exclusivity or minimum. A party may cancel for material breach when contractual and statutory requirements are met, including after [ten] Working Days to remedy where cure is possible. Immediate cancellation is permitted for insolvency, fraud, infringement, unlawful performance or an unremedied material safety risk.

Ordinary ending does not cancel an accepted Order. The Manufacturer must stop new production, return Buyer Materials, deliver paid conforming work and provide agreed transfer records. The Buyer must pay for conforming accepted work. Accrued payment, ownership, licences, confidentiality, product remedies and recall cooperation survive.

10. General
The Manufacturer may not subcontract a critical development or manufacturing operation without written consent and remains responsible for approved subcontractors. The parties are independent contractors, and the Buyer independently sets resale prices. Changes must be signed by authorised representatives. Notices must be delivered by hand, tracked post or email and are effective on proven receipt.

New Zealand law governs, and New Zealand courts have jurisdiction.

SCHEDULE 1 PRODUCT BRIEF AND APPROVED SPECIFICATION
[Features; formula/design; prototypes; approved sources; tests; claims; packaging/labels; shelf life; records; product requirements and responsible party].

SCHEDULE 2 DEVELOPMENT, EXCLUSIVITY AND COMMERCIAL TERMS
[Milestones; development fee; tooling; minimum order; forecasts/minimums; NZD prices; GST; delivery; payment; defined exclusivity if any; any specific and fair trade-only contracting out].

SCHEDULE 3 BUYER MATERIALS AND INTELLECTUAL PROPERTY
[Marks; artwork; data; tooling; Commissioned Deliverables; Background Technology; necessary licence; return/de-branding/PPSR arrangements].

SIGNATURES
For the Buyer: [authorised signatory, position, signature and date].
For the Manufacturer: [authorised signatory, position, signature and date].
Witness if used: [name, address, signature and date].


---
License: Licensed under CC BY 4.0. Attribution is required when you publish or redistribute this Template or an adapted version to the public. Attribution is not required merely because you use or adapt the Template for your own business or legal purposes, including preparing, negotiating, signing, or exchanging an agreement with a counterparty. License details.
License details: https://contract-templates.getfebruary.ai/license/