CONTRACT MANUFACTURING AGREEMENT
India

Date: [date]. Place of execution: [city and State or Union Territory].
Customer: [legal name, entity type, registration number, GSTIN and address] (Customer).
Contract Manufacturer: [legal name, entity type, registration number, GSTIN and address] (Manufacturer).

Product means each finished product in Schedule 1. Product File means the Customer-owned specifications, formulae, drawings, bill of materials, approved sources, packaging, labels, tests and release criteria in Schedule 1. Order means a written order accepted under clause 3. Batch means Product made under one production record. Customer Property means the materials, tooling, reference samples and information listed in Schedule 3. Nonconformity means failure to meet the Product File, an accepted Order or a mandatory requirement allocated to the Manufacturer. Business Day means a day other than Sunday or a public holiday at the delivery location.

1. Appointment and programme
The Customer appoints the Manufacturer, on a [non-exclusive/exclusive for the Product and territory stated in Schedule 1] basis, to establish the agreed process and manufacture the Product for supply to the Customer. The Manufacturer must use suitably trained personnel, fit premises and documented controls and may manufacture Product only against an accepted Order.

The Product is a Customer-directed programme. The Manufacturer may not change the Product File, manufacturing site, critical equipment, approved source or material process without the Customer's prior written approval. Approval does not transfer responsibility for the Manufacturer's performance.

2. Transfer, validation and batch release
The parties must complete the transfer and validation plan in Schedule 1 before routine production. The Manufacturer must document trial batches, process parameters, test methods, deviations and agreed acceptance results. Commercial production begins only after both parties sign the validation record.

For each Batch, the Manufacturer must keep the Batch record and provide the certificate, samples and test results required by Schedule 1. The Manufacturer may release a Batch only if its authorised quality representative confirms conformity. Customer review or release does not waive a latent Nonconformity.

3. Forecasts and Orders
Forecasts are for capacity planning and are not binding unless Schedule 2 states an agreed minimum. An Order must state Product, quantity, price, delivery date and destination. It becomes binding only when the Manufacturer accepts it in writing within [five] Business Days. Silence is not acceptance.

This agreement prevails over an Order except for its permitted commercial particulars. A quotation, acknowledgement, invoice or portal term does not vary this agreement unless authorised representatives sign the identified variation.

4. Materials, facilities and compliance
The Manufacturer must obtain materials assigned to it from approved sources, prevent substitution and contamination, and maintain traceability for [period]. It must hold the licences and approvals allocated to it in Schedule 1 and promptly disclose an inspection, warning, failed test, suspected safety issue or supply disruption affecting the Product.

The Customer is responsible for the accuracy and lawful use of the Customer-supplied formula, design, claims and marks except to the extent the Manufacturer expressly agreed to verify them. The Manufacturer is responsible for its facility, process, workmanship, records and declarations assigned to it. Neither party may make a filing or representation in the other's name without written authority.

Where Product is a pre-packaged commodity, Schedule 1 must allocate the required label declarations and verification. Any product-specific BIS, FSSAI, environmental, import, export or other approval must be expressly identified with the responsible party; this agreement does not itself establish that an approval applies.

5. Inspection, Nonconformity and recall
On reasonable notice, the Customer may audit the Product operations and relevant records without unreasonably interrupting production. The Customer may inspect Product before shipment and for [ten] Business Days after delivery. Payment, inspection or failure to inspect does not waive a latent Nonconformity or a right that cannot lawfully be excluded.

The Manufacturer must segregate suspect Product and, at the Customer's reasonable election, promptly rework, replace or refund Product with a Nonconformity caused by its breach. It must bear reasonable documented retest, return and redelivery cost caused by that breach. The Customer bears equivalent cost to the extent a failure was caused by inaccurate Customer Property or an unauthorised Customer instruction.

Each party must promptly notify a suspected systemic defect, adverse event, regulator enquiry or recall request. They must cooperate on traceability, stop-supply, notice, correction and recall. Reasonable recall cost is borne according to the extent each party's breach, negligence or supplied defective material caused the event, subject to mandatory law.

6. Delivery, title and risk
The Manufacturer must deliver conforming Product with the documents and packaging in Schedule 2. Title to Product passes [on full payment/on delivery]. Risk passes on completed delivery at the named destination unless Schedule 2 states a valid Incoterm and named place.

Customer Property remains the Customer's property. The Manufacturer must mark and segregate it, use it only for this agreement, exercise reasonable care and report loss or damage promptly. The Manufacturer must not assert or create a charge over Customer Property except a right that cannot lawfully be excluded.

7. Price, tax and payment
Prices, currency, GST treatment, permitted adjustments and payment milestones are in Schedule 2. The Manufacturer must issue a valid tax invoice. The Customer must pay an undisputed invoice within [thirty] days and must promptly explain any disputed amount.

The Manufacturer must state in Schedule 2 whether it is a micro or small enterprise and give its Udyam number. If the Micro, Small and Medium Enterprises Development Act 2006 applies, its mandatory payment period, interest and remedies prevail over inconsistent terms.

8. Intellectual property and confidentiality
Each party retains its pre-existing intellectual property. The Customer owns the Product File and Customer Property. The Customer grants the Manufacturer a non-transferable licence during the term solely to perform this agreement. The Manufacturer must not sell overruns, seconds or Product and must de-brand or destroy rejected excess as the Customer reasonably directs.

On full payment, the Manufacturer assigns to the Customer the transferable rights in validation reports, bespoke tooling drawings and other commissioned items identified as Customer Deliverables in Schedule 3. The Manufacturer retains its general manufacturing methods and background know-how, but grants the licence expressly stated in Schedule 3, if any, needed to use a Customer Deliverable.

Each party must protect the other's non-public technical and commercial information, use it only for this agreement and disclose it only to bound personnel, approved subcontractors and advisers who need it, or as law requires.

9. Term and ending
This agreement starts on [date] and continues for [term]. Either party may end it on [ninety] days' notice, but an accepted Order continues unless the parties agree otherwise. A party may terminate for material breach not cured within [fifteen] Business Days after notice where cure is possible, or immediately for insolvency, fraud, unlawful performance or an unremedied material product-safety risk.

On ending, the Manufacturer must stop unauthorised production, return Customer Property, deliver paid conforming work in progress and provide traceability and validation records. The Customer must pay for conforming accepted work. Accrued payment, quality remedies, recall cooperation, confidentiality and intellectual-property terms survive.

10. General
The Manufacturer may not subcontract a critical operation without written consent and remains responsible for approved subcontractors. Changes must be signed by authorised representatives. Notices must be sent by hand, registered post or email and take effect on proven delivery. Neither party may assign this agreement without consent except to a successor to substantially all the relevant business that assumes it.

Indian law governs. Courts at [city and State or Union Territory] have jurisdiction, subject to mandatory forums. The parties must execute and stamp this agreement as required where it is executed, with duty borne by [party].

SCHEDULE 1 PRODUCT AND VALIDATION
[Product; Product File; approved sources; trial and validation plan; Batch records; release criteria; shelf life; packaging and labels; applicable approvals and responsible party].

SCHEDULE 2 ORDERS, DELIVERY AND PRICE
[Forecast; minimum if any; lead time; quantities; prices; GST; delivery terms; documents; invoice and payment; Manufacturer MSME/Udyam status].

SCHEDULE 3 CUSTOMER PROPERTY AND RIGHTS
[Materials; tooling; samples; marks; Customer Deliverables; permitted background-IP licence; return instructions].

SIGNATURES
For the Customer: [authorised signatory, office, signature and date].
For the Manufacturer: [authorised signatory, office, signature and date].
Witnesses if required: [names, addresses, signatures and dates].



---
License: Licensed under CC BY 4.0. Attribution is required when you publish or redistribute this Template or an adapted version to the public. Attribution is not required merely because you use or adapt the Template for your own business or legal purposes, including preparing, negotiating, signing, or exchanging an agreement with a counterparty. License details.
License details: https://contract-templates.getfebruary.ai/license/